Aluminum-faced clutch covers for: 950ADV /990ADV / 950SE / 950SM
Made out of 6061-T6 aluminum, polycarbonate, stainless hardware and O-ringed. This offers a clean, leak proof cover that's easy on and off, just like your stock cover. (No more than 10 Min. install time)
Benefits:
- Reinforced with Aluminum where your brake lever would crack your stock cover, or dent the after-market KTM cover in a crash.
- This cover is minimally thicker (overall height) than your stock cover, even though there is 0.375"" of protection in areas to prevent crash damage.
- Also allows you to visually check for oil contamination when river crossing are often, or you have a tip over. (this is not a wet sump motor so this is not a sight glass for oil level)
- This is an easy way to make sure your clutch bolts are not loosening up. Catastrophic failure occurs when that happens.
- Reuse your stock clutch cover gasket and it is fully rebuildable if need be.
Color Options:
Body: Black, Orange or Machine
Aluminum Cover: Black, Orange or Machine
Pattern: Half Swirl, Half Spoke, Full
